home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Winzipper
/
Winzipper_ISO.iso
/
nt4.0 server
/
DRVLIB.NIC
/
OCTK16
/
@0A86.ADF
< prev
next >
Wrap
Text File
|
1996-07-31
|
7KB
|
229 lines
;╔═════════════════════════════════════════════════════════════════╗
;║ ║
;║ Olicom MC 16/4 Token-Ring Network Adapter Revision 6 and up ║
;║ SMT based version with ONLY STP cable support ║
;║ Adapter Description File Version 4.00 ║
;║ Copyright 1992 by Olicom ║
;║ ║
;╚═════════════════════════════════════════════════════════════════╝
AdapterID 00A86h
AdapterName "Olicom MC 16/4 Token-Ring Network Adapter"
NumBytes 4
FixedResources
POS[0]=X0XXXXXXb
POS[3]=X0XXX000b
NamedItem Prompt "I/O Address Location"
Choice "0 = 0A20-0A23 & 0A30-0A3F"
POS[0]=XX00XXXXb
IO 0A20h-0A23h 0A30h-0A3Fh
Choice "1 = 0A24-0A27 & 0A40-0A4F"
POS[0]=XX01XXXXb
IO 0A24h-0A27h 0A40h-0A4Fh
Choice "2 = 0A50-0A53 & 0A60-0A6F"
POS[0]=XX10XXXXb
IO 0A50h-0A53h 0A60h-0A6Fh
Choice "3 = 0A54-0A57 & 0A70-0A7F"
POS[0]=XX11XXXXb
IO 0A54h-0A57h 0A70h-0A7Fh
Help "I/O ADDRESS LOCATION: Up to four Token-Ring Network adapters
may be installed in this computer. An adapter can use one of
four I/O port address combinations.
Each combination consists of two address ranges.
The selections are, in order of preference, as follows :
0 = 0A20-0A23 & 0A30-0A3F,
1 = 0A24-0A27 & 0A40-0A4F,
2 = 0A50-0A53 & 0A60-0A6F,
3 = 0A54-0A57 & 0A70-0A7F.
The assignment for the Token-Ring Network adapter can be changed
by selecting 'Change Configuration' and then using the
F5=Previous and the F6=Next keys. If an assignment has an
asterisk (*) by it, it is in conflict with another
assignment and the I/O port address must be changed."
NamedItem Prompt "Adapter Data Rate"
Choice "4 Mbps"
POS[3]=XXXX0XXXb
Choice "16 Mbps"
POS[3]=XXXX1XXXb
Help "ADAPTER DATA RATE: This Token-Ring Network adapter can operate
at two different data rates, 4 Mbps or 16 Mbps. You MUST set the
adapter data rate to the same rate as the Token-Ring Network LAN
segment to which you are connecting the adapter. The assignment
for this data rate can be changed by selecting 'Change Configuration'
and then using the F5=Previous and the F6=Next keys."
NamedItem Prompt "RPL Address location"
Choice "RPL Disabled"
POS[2]=000110XXb
POS[3]=0XXXXXXXb
Choice "CC000-CDFFF"
POS[2]=100110XXb
POS[3]=1XXXXXXXb
MEM 0CC000h - 0CDFFFh
Choice "CE000-CFFFF"
POS[2]=100111XXb
POS[3]=1XXXXXXXb
MEM 0CE000h - 0CFFFFh
Choice "D0000-D1FFF"
POS[2]=101000XXb
POS[3]=1XXXXXXXb
MEM 0D0000h - 0D1FFFh
Choice "D2000-D3FFF"
POS[2]=101001XXb
POS[3]=1XXXXXXXb
MEM 0D2000h - 0D3FFFh
Choice "D4000-D5FFF"
POS[2]=101010XXb
POS[3]=1XXXXXXXb
MEM 0D4000h - 0D5FFFh
Choice "D6000-D7FFF"
POS[2]=101011XXb
POS[3]=1XXXXXXXb
MEM 0D6000h - 0D7FFFh
Choice "D8000-D9FFF"
POS[2]=101100XXb
POS[3]=1XXXXXXXb
MEM 0D8000h - 0D9FFFh
Choice "DA000-DBFFF"
POS[2]=101101XXb
POS[3]=1XXXXXXXb
MEM 0DA000h - 0DBFFFh
Choice "DC000-DDFFF"
POS[2]=101110XXb
POS[3]=1XXXXXXXb
MEM 0DC000h - 0DDFFFh
Choice "DE000-DFFFF"
POS[2]=101111XXb
POS[3]=1XXXXXXXb
MEM 0DE000h - 0DFFFFh
Choice "C8000-C9FFF"
POS[2]=100100XXb
POS[3]=1XXXXXXXb
MEM 0C8000h - 0C9FFFh
Choice "CA000-CBFFF"
POS[2]=100101XXb
POS[3]=1XXXXXXXb
MEM 0CA000h - 0CBFFFh
Help "RPL ADDRESS LOCATION: There are 12 possible 8K blocks of PC
memory that can be assigned for accessing the RPL area of the
Token-Ring Network adapter. The preferred RPL address for the
adapter is: CC000-CDFFF. The assignment for this RPL
address can be changed by selecting 'Change Configuration'
and then using the F5=Previous and the F6=Next keys.
The RPL address selected must not be assigned for use by any
other adapter or option. If an assignment has an asterisk (*)
by it, it is in conflict with another assignment and the RPL
address must be changed. If a conflict continues to exist, you
may have to change the assignments for other adapters or options
that are in your computer to resolve the conflict."
NamedItem Prompt "Interrupt Level"
Choice "Interrupt 2"
POS[2]=XXXXXX00b
INT 2d
Choice "Interrupt 3"
POS[2]=XXXXXX01b
INT 3d
Choice "Interrupt 10"
POS[2]=XXXXXX10b
INT 10d
Choice "Interrupt 11"
POS[2]=XXXXXX11b
INT 11d
Help "INTERRUPT LEVEL: This Token-Ring Network adapter can operate
on one of four interrupt levels: 2, 3, 10, or 11. The preferred
interrupt level is 2, but the adapter can operate on any of
the four levels if necessary. The assignment for this interrupt
level can be changed by selecting 'Change Configuration' and
then using the F5=Previous and the F6=Next keys."
NamedItem Prompt "Bus Master Arbitration Level"
Choice "Level 8"
POS[0]=XXXX000Xb
ARB 8
Choice "Level 9"
POS[0]=XXXX001Xb
ARB 9
Choice "Level 10"
POS[0]=XXXX010Xb
ARB 10
Choice "Level 11"
POS[0]=XXXX011Xb
ARB 11
Choice "Level 12"
POS[0]=XXXX100Xb
ARB 12
Choice "Level 13"
POS[0]=XXXX101Xb
ARB 13
Choice "Level 14"
POS[0]=XXXX110Xb
ARB 14
Help "ARBITRATION LEVEL: The Bus Master Arbitration level need
only be changed if it is in conflict with another adapter.
Conflicting assignments are marked with an asterisk.
Use the F5=Previous and the F6=Next keys to change
arbitration level assignments if you are in the
'Change configuration' window."
NamedItem Prompt "Bus Master Release Timing"
Choice "Maximum"
POS[0]=0XXXXXXXb
Choice "Immediately"
POS[0]=1XXXXXXXb
Help "BUS RELEASE: During a Micro Channel DMA operation this
Token-Ring Network Adapter supports two different ways of
releasing the bus after the Preempt signal. After a
Preempt occurs the bus can be released either immediately or
after the maximum time allotted by the Micro Channel
architecture. The best performance is achieved if this
adapter is allowed to continue for the maximum time allowed.
The assignment for bus release can be changed by selecting
'Change Configuration' and then using the F5=Previous and the
F6=Next keys."